Which is better a Nikon FE2 or a Nikon FM10?

Question asked at Yahoo Answers

Operation

The FM10 is a mechanically (springs, gears, levers) controlled manual focus SLR with manual exposure control. It is operable without batteries, which are only required (two S76 or A76, or one 1/3N) for the light metering information system. This consists of an internal 60/40 percent centerweighted, silicon photodiode light meter linked to a center-the-LED exposure control system using vertically arranged +/•/– light emitting diodes (LEDs) on the left side of the viewfinder to indicate the readings of the meter versus the actual camera settings. The focusing screen also has 3 mm split image rangefinder and 1 mm microprism collar focusing aids. Overall, the FM10 has the features of a typical late 1970s SLR.

[edit] Lens compatibility

The FM10 accepts any lens with the Nikon F bayonet mount supporting the Automatic Indexing (AI) feature (introduced in 1977). The modern Nikon made AI lenses are the AF-S Nikkor, AF-I Nikkor, AF Nikkor D and Nikkor AI-S types. The discontinued Nikkor AI and Nikon Series E lenses are also AI types. Nikon’s most recent 35 mm film SLR lenses, the AF Nikkor G type (introduced in 2000) lacking an aperture control ring; and the AF Nikkor DX type (2003) with image circles sized for Nikon's digital SLRs will mount, but will not function properly. IX Nikkor lenses (1996), for Nikon's Advanced Photo System (APS) film SLRs, must not be mounted, as their rear elements will intrude far enough into the mirror box to cause damage.

[edit] Flash

The Nikon SB-M dedicated flash is designed specifically for the FM10, but it will also accept any other nondedicated hot shoe mounted flash for guide number manual or flash mounted sensor automatic exposure control - the venerable Vivitar 283 (guide number 120, ASA 100/feet; 37, DIN 21/meters) was still available new a quarter century after its introduction in 1975. The FM10 does not accept a motor drive; film is only advanced manually via a thumb lever.